Our R&D department is constantly committed to find the best solutions to meet our clients’ needs, through cooperation with universities, bibliographic research and analyses of the most innovative raw materials available on the market. Contact Coverplast by submitting your requests or questions.
Contact us for any need, go to our contact form: CLICK HERE

Products
Synthetic anti-rust spray
Anti-rust with modified alkyd binders in which selected pigments and extenders are finely ground. Anticorrosive agent for ferrous structures and metal carpentry in general, easy to apply even with airless tools and featuring good resistance to atmospheric agents. The slow-dry, dust-free accompanied by fast final hardening makes these anti-rust agents particularly suitable for painting large surfaces. They require a synthetic finish. They are not compatible with nitro, epoxy, polyurethane and chlorinated rubber finishes.
Ref. Cvp0015 colour on request – 20 L single package
Chlorinated rubber anti-rust
They are anti-rust agents based on chlorinated rubber resins suitably modified with unsaponifiable plasticisers. They can be easily applied with all systems for final retouches and maintenance. They dry quickly and thus are ideal for the anti-corrosive protection of ferrous structures and metal carpentry in general, subjected to aggressive atmospheres, marine environments, salt water, etc. They offer good resistance to water vapour. Also suitable for coating alkaline substrates, such as cement, concrete and swimming pools.
Ref. Cvp0018 colour on request – 20 L single package
Intermediate two-pack epoxy primers
The “Epo cos” series consists of two-pack primers, fillers and intermediate paints constituted by pure epoxy resin, pigments and selected inert fillers, for the cross-linking where modified polyamide or amine catalysts are required. These products are particularly versatile and adhere to various iron and galvanised steel, cement and concrete surfaces. They can be over-painted with epoxy, epox-yvinyl, polyurethane and vinyl products. These primers provide anti-corrosive protection with excellent performance in terms of adhesion, chemical and mechanical resistance, good abrasion resistance and excellent flexibility.
Ref. Cvp0019 colour on request – 20 L single package
Fast drying synthetic enamels
These enamels are based on modified alkyd resins, featuring high quality and selected pigments, with excellent resistance to yellowing. They are characterised by good fullness, gloss, good mechanical properties and fast drying in general. These enamels were specially developed for spray application with airless or airbrush guns and for protecting iron products, such as heavy carpentry, industrial machines, earthmoving machines and equipment in general.
It is necessary to use anti-corrosive primers with excellent resistance to overspray.
Ref. Cvp0023 colour on request – 20 L single package
Two-pack epoxy-based enamels
The “Epox” series consists of two-pack epoxy-based enamels, constituted by epoxy resin, pigments and selected inert fillers, for the cross-linking of which modified polyamide or amine catalysts are required. These enamels provide anti-corrosive protection with excellent performance in terms of adhesion, chemical and mechanical resistance, good abrasion resistance and excellent flexibility. Ideal for protecting iron structures, galvanised sheet metal, light alloys, suitably prepared with epoxy fillers such as those of the ea series.
Also suitable for applications on cement or concrete structures, provided that they are free of humidity and mechanically brushed. They have good resistance to non-aggressive atmospheres, while when exposed outdoors they show the typical phenomenon of surface pulverisation.
Ref. Cvp003 colour on request – 20 L single package
Two-pack polyurethane-based enamels
The “Poly” series offers two-pack polyurethane enamels made of selected light-resistant, finely ground, selected pigments for which a polyisocyanic catalyst is required for cross-linking. They provide a film with excellent fullness, high hardness, excellent resistance to mineral oils, aromatic hydrocarbons, alcohols and solvents in general. These enamels have excellent adhesion, chemical and mechanical resistance, good abrasion resistance and excellent flexibility. Ideal for the anti-corrosive protection of iron structures, galvanised sheet metal, light alloys, suitably prepared with a proper epoxy-based filler.
Ref. Cvp0025 colour on request – 20 L single package
Concentrated pastes
Paste with high pigment concentration and wide compatibility with the range of converters. They are developed with selected pigments with excellent resistance to atmospheric agents and light. They are carefully checked to ensure a high colorimetric yield that is constant over time.
The high concentration of pigments allows operating with small quantities of pastes, without affecting the covering power of the colours. High gloss, optimal performance, high colorimetric yield, absence of possible flocculations.
Converters
A full range of products designed to create, through the addition of related concentrated pastes, the most common paints used in the industrial sector. These are both one-pack and two-pack products. For their general characteristics please refer to the data sheets of the individual products.
Ref. Cvp10xx colour on request – 20 L single package
Two-pack water-soluble epoxy-based fillers
Two-pack water-soluble products based on special epoxy resins and polyamide catalysts with fast drying, excellent adhesion on sheet metal, excellent elasticity and low organic solvent content not exceeding 3 – 5 % at the time of application. The main characteristics are the pigmentation based on inorganic and organic non-toxic pigments, free from lead chromates, featuring excellent chemical, mechanical and weather agent resistance. It can be used on sheet metal, cast iron and steel substrates. They can be overpainted with epoxy and polyurethane-based finishes, both water and solvent-based
Ref. Cvp0020 colour on request – 20 L single package
Water-soluble fast drying enamels
Products based on special water-soluble alkyd resins with special modifications featuring fast drying, excellent adhesion on sheet metal, good elasticity and low organic solvent content not exceeding 5 – 10 % at the time of application. The main characteristics are the pigmentation based on inorganic and organic pigments, free from lead chromates, featuring high light resistance, high brightness, and good chemical, physical, and weather agent resistance. It can be used on sheet metal, cast iron and steel substrates prepared in advance with water-soluble anti-rust products (ja series). Good general coverage except for some yellow and red-orange colours since formulated with organic pigments free from lead chromates. The use of matching colour fillers is recommended.
Ref. Cvp0036 colour on request – 20 L single package
Water-soluble acrylic enamels
Fast drying water-soluble acrylic resin-based finish. The product is bright, hard, resistant to light and weather agents and features excellent adhesion if applied direction on sheet metal and on water-based or solvent-based fillers. The VOC (volatile organic compound) content is less than 5% as supplied. The particular filming process allows the film to quickly become insoluble in water. Thus, it is possible to place the products outdoor even after a few hours from painting, including in high-humidity or rainy environments.
Ref. Cvp0037 colour on request – 20 L single package
Two-pack water-soluble epoxy-based enamels
Two-pack water-soluble products based on special epoxy resins and polyamide catalysts with fast drying, excellent adhesion on sheet metal, excellent elasticity and low organic solvent content not exceeding 3 – 5 % at the time of application. The main characteristics are the pigmentation based on inorganic and organic non-toxic pigments, free from lead chromates, featuring excellent light resistance, high brightness, excellent chemical, mechanical and weather agent resistance. It can be used on sheet metal, cast iron and steel substrates. Excellent general coverage except for yellow and red-orange colours since formulated with organic pigments free from lead chromates. The use of matching colour fillers is recommended.
Ref. Cvp0038 colour on request – 20 L single package
One-pack acrylic centreline paint
One-pack acrylic centreline paint that thanks to its particular formulation offers higher quality respect to traditional products with improvement of chemical and mechanical resistance characteristics.
Ref. Cvp0039 colour on request – 20 L single package